Vegetable Conveyor Belt HCB-400-TS with Weighing System

This conveyor belt with weighing system is derived from the standard model conveyor belt HCB-400-TS. The addition to this version is the ARCI-25 stainless steel weighing unit. By using the display, the desired filling weight can be set. After starting the machine, the belt will start running and the basket underneath the output funnel will be filled. Once the set filling weight has been reached, the belt will automatically stop running. The conveyor is also equipped with a waterproof stainless steel control cabinet with a frequency inverter. With this addition, the belt speed can easily be adjusted as well as the acceleration and deacceleration. The weighing system is available in different (and cusomizable) plate sizes, weighing capacities, and graduations. This conveyor goes perfectly together with the belt cutting machine BCM-1650 and the dicing machine 3DD.

Brochure HCB-400-TS

SKU: 1440015 Categories: ,


Conveyor belt with weighing system HCB-400-TS

  • Stainless steel drum motor and turning roll
  • One-sided support of the belt frame
  • The input and output funnel can both be dismantled
  • Detachable conveyor belt
  • Stainless steel brake castors
  • ARCI-25 stainless steel weighing system

Advantages of the conveyor belt with weighing system HCB-400-TS

  • Products can easily be dosed to the desired amount with the help of the weighing system.
  • Because the belt is trough-shaped, products are lead automatically to the centre of the belt. That is why there is no need for side guides.
  • Another advantage of the trough-shaped belt is that products are transported much better. Even when the conveyor belt is wet because of vegetable juices.
  • The input and output funnel precisely fit, to make sure that no products will be spilt on the floor. In the input funnel a white (food grade) rubber closure is mounted. In the output funnel a scrapper is mounted which prevents products to stick to the belt and consequently prevents products to fall on the ground on the retour part.
  • The belt can be cleaned thoroughly and easily. The input and output funnel can be detached very easily. By means of a unbolt button, the turning roll can be turned over to release the belt. Because the frame only has legs on one side, the belt can be removed from the belt frame very easily. Another advantage is that the belt frame can be cleaned perfectly on the inside as well.
  • The belt frame is very solid. All the seams are completely welded.
  • Both in the stainless steel drum motor and the stainless steel turning roll the bearings are mounted inside, so that they cannot get in touch with water.
  • On the inside of the belt there are two guiding belts. They move along the guiding rails of the belt frame, the drum motor and the turning roll. Thanks to this construction the belt runs in alignment perfectly.

Technical details

  • Belt width: 400 mm
  • Electrical data: 1 Ph / 230 V / 0.25 kW / 0.5 A / 127 RPM
  • Belt speed: approximately 48 m/min.
  • Weight: 190 kg

You may also like…